USB stands for universal serial bus, a short distance digital data communication over USB cables. A USB is attached to an USB port; a cable connection interfaces for electronic devices. You might always wonder to Increase Pendrive Data Transfer Speed.
It also supplies electronic power across the cable to the devices that need it. USB drivers are also used to transfer work from one computer to another in absence of network.
Many types of consumer electronics support USB interfaces. These types of equipment are most commonly used for computer networking and are as follows-
1. linetwork adapters.
2. broadband and cellular modems for Internet access.
3. printers to be shared on a home network.
Increase Pendrive Data Transfer Speed : Using USB Port
- Connect two devices directly with one USB cable by plugging each end into a USB port. Do not plug both the end-of-of cable into the same port as it will cause damage to the device.
- You may plug cables into a USB port at any time regardless of whether the devices involved.
- By using a USB hub, one can plug multiple devices. A USB hub plugs into one USB port and contains additional ports for other devices to connect subsequently.
Ways to speed up the speed of USB cable- Pen drives / USB cables is an important device as it helps to transfer stuff including files, documents, media, videos etc., from one computer to another easily.
However, many times, the speed of pen drive gets slow while transferring a file and this is a time-consuming and irritating task.
Therefore, we need to look up for ways so that we can Increase Pendrive Data Transfer Speed. Following are some of the ways through which you can increase the speed of your pen drive.
# Speed up the computer
Your computer performance makes the huge impact on data transfer speed. Better RAM, better processor and virus free system always improves data transfer speed.
Though you cannot improve your processor, you can upgrade your RAM and you can remove malware.
Do remember while upgrading RAM, you must check RAM compatibility with your motherboard. If you want to run your PC like a new one, you must continuously use Antivirus and PC Tune up products.
Instead of using two products, you can use one product which gives you two features. I can suggest you AVG Ultimate(20% Discounted Link) which gives unlimited protection and tune up for your unlimited devices.
If you need a less priced alternative, I can recommend you Panda Global Security(50% Discounted link).
You can also improve your computer speed without spending money. You need to follow these tips to increase computer speed.
# Transfer one file at a time
You need to transfer one file at a time. If you transfer more than one file, you will get less speed.
Remember, the computer will not share speed equally, instead, it will reduce the speed. If you want to send multiple files, select all the files and send at once.
When sending all files at once, computer considers it as one file and it transfers with full speed.
# Close all running programs
When you want to Increase Pendrive Data Transfer Speed, you need to close remaining running programs.When you run more programs, programs consumes computer resources like RAM and disk space. This will have the effect on data transfer speed.
# Use single USB at a time
Don’t use more than one USB at a time. Use only one USB and send only one file at a time.
# Transfer location
Location plays an important role. OR you can say that location is an important factor. Transferring files to a local computer then it will speed up the transfer.
# Change removal policy
“Quick Removal” and “Better performance” are the two removal policies available for USB.
By default Windows enables “Quick Removal” policy. In “Quick removal” policy, you can remove your pen drive when you want.
You will not lose data, Even if you remove pen drive without clicking on “safely remove hardware and eject media”.
But in “Better performance” policy you must remove USB safely otherwise there is a chance that you may lose data. If you enable “Better performance” policy, you may get better speed.
Follow below steps to enable “Better performance” policy
1. Place your pen drive in USB port.
2. Go to “My computer”.
3. Right click on your USB name.
- Click on Properties. You will see “Properties” window as shown below.
- Click on “Hardware” in the top menu.
- Select your device name.
- Click on “Properties” as shown in above screenshot. You will see your device property window shown below.
- Click on “Change Settings” shown in above screenshot. You will see another property window.
- Click on “Policies” in the top menu.
- Check “Better Performance” option.
- Click “Ok”.
Now your USB work in better performance removal policy. Though it is better performance option, I did not find the huge impact on file transfer speed. Of course, there is a slight improvement. It is your wish to use this option or not.
I have transferred a file with two options. Maximum speed was 4.85 Mb/S with “Quick removal” option where 5.04 MB/S with “Better performance” option.
For such small improvement, you need not put pen drive in risky mode. Because you must safely remove pen drive with this mode otherwise you may lose data. Even if you lose data you can recover lost data from USB.
# Use USB 3.0
The version of USB port plays an important role in transferring speed. Using a USB port of past version will lower the speed. In this case, you can buy USB 3.0 pen drive.
Because the maximum speed of USB 2.0 is 60 Mbps(MegaBytes per second) where maximum speed of USB 3.0 is 640 Mbps.
The above following methods show how one can Increase Pendrive Data Transfer Speed while transferring data.
However, there are many more methods available to do the same. Depending upon the need and priority, one can select the methods and can proceed accordingly.
So these are the methods to How To Increase Pendrive Data Transfer Speed. By utilizing all these methods, you can efficiently boost your data transfer speed of your Pendrive and easily enjoy the high-speed transfer rate on your device. Leave a comment below about your experience with these methods and don’t forget this post with your friends.